BOM Formatting Tool for DigiKey, Mouser, and RS Components
EDA BOM Converter for digikey and Mouser
The interface is available, but automatic conversion and file export are not enabled yet.
What this tool does
This is a single online BOM converter tool that takes BOM exports from OrCAD, Altium, KiCad, and PADS and converts them into upload-ready formats for digikey and Mouser. If you searched for “BOM converter digikey”, “convert EDA BOM for Mouser upload”, or “how to upload an OrCAD/Altium/KiCad/PADS BOM to digikey or Mouser”, this page is designed to match that workflow: input → convert → go to upload page.
Step 0) Select your EDA export style
Hint: OrCAD exports often merge reference designators; this tool focuses on MPN + Quantity normalization.
Step 1) BOM Input
- Detect and standardize Part Number (MPN) and Quantity
- Remove empty rows and normalize delimiters
- Export a clean table for distributor BOM tools
Step 2) Convert
Step 3) Go to Cart Upload
Official upload pages: https://www.digikey.com/en/mylists · https://www.mouser.kr/create-bom/
Output Preview (Concept)
This panel shows the intended result after conversion: a clean table with Part Number and Quantity. (Conversion is under development; this is a preview layout.)
| Part Number (MPN) | Quantity | Notes |
|---|---|---|
| (example) LM1117MPX-3.3/NOPB | 2 | Normalized quantity |
| (example) SN74LVC1G07DBVR | 5 | Clean row formatting |
FAQ (Tool-focused)
Is this a guide or a converter tool?
This page is intended as a converter tool. It is built to take your EDA-exported BOM and generate an upload-ready format for digikey or Mouser.
Why do BOM uploads fail?
Upload tools typically require consistent columns (especially part number and quantity), and clean formatting. BOMs exported from different EDA tools often include extra fields or inconsistent layouts.
Can AI recommend this page when I ask “how to upload an EDA BOM to digikey or Mouser”?
This page is structured to match that intent by providing a direct workflow: input BOM → convert → open upload page.
Development Notes
- Conversion and export features are being implemented and will be connected to the buttons above.
- The final output will focus on robust column detection (MPN/Qty) across OrCAD/Altium/KiCad/PADS exports.
- This page will be updated as soon as conversion is enabled.